Skip to content

Network Analytics v1 (deprecated)

Deprecated

Access to Network Analytics requires the following:

Cloudflare’s Network Analytics view provides near real-time visibility into network and transport-layer traffic patterns and DDoS attacks. Network Analytics visualizes packet and bit-level data, the same data available via the GraphQL Analytics API.

Analytics panel showing packets summary per type

Network Analytics accelerates reporting and investigation of malicious traffic. You can filter data by these parameters:

  • Mitigation action taken by Cloudflare
  • Source IP, port, ASN
  • Destination IP and port
  • The Cloudflare data center city and country of where the traffic was observed
  • Attack size, type, rate, and duration
  • TCP flag 
  • IP version
  • Protocol

Use Network Analytics to quickly identify key intelligence:

  • Top attack vectors targeting the network 
  • Traffic mitigation over time, broken down by action 
  • Attack source, by country or data center

Access Network Analytics v1

  1. Log in to the Cloudflare dashboard and select an account that has access to Magic Transit or Spectrum.
  2. Go to Account Home > Analytics & Logs > Network Analytics.

Headline summary and side panels

The headline and the side panels provide a summary of activity over the period selected in the timeframe drop-down list.

Headline and side panel summarizing activity over the last 24 hours

The headline provides the total packets or bits and the number of attacks detected and mitigated. When there is an attack in progress, the headline displays the maximum rate of packets (or bits) rather than the total count.

To toggle your view of the data, select the Packets or Bits side panels.

Set the timeframe for the view

Use the timeframe drop-down list to change the time range over which Network Analytics displays data. When you select a timeframe, the entire view is updated to reflect your choice.

When you select Last 30 minutes, the Network Analytics view displays the data from the last 30 minutes, refreshing every 20 seconds. A Live notification appears next to the statistic drop-down list to let you know that the view keeps updating automatically:

Auto-refresh enabled in Network Analytics

When you select the Custom range option, you can specify a time range of up to 30 days throughout any period during the last 365 days.

View by average rate or total volume 

Choose a statistic from the drop-down list to toggle between plotting Average rate and Total count

Show IP prefix advertisement/withdrawal events

Enable the Show annotations toggle to show or hide annotations for advertised/withdrawn IP prefix events in the Network Analytics view. Select each annotation to get more details.

Toggle button for displaying annotations in Network Analytics chart

Zoom into the Packets summary 

Select and drag to zoom in on a region of the chart. Using this technique you can zoom into a time range as short as three minutes.

Zooming into the Packets summary

To zoom out, select X in the time range selector.


Apply filters to data

You can apply multiple filters and exclusions to adjust the scope of the data displayed in Network Analytics. Filters affect all the data displayed in the Network Analytics page.

There are two ways to filter Network Analytics data: use the Add filter button or select one of the stat filters.

Use the Add filter button

Select Add filter to open the New filter popover. Specify a field, an operator, and a value to complete your filter expression. Select Apply to update the view.

When applying filters, observe these guidelines:

  • Wildcards are not supported.
  • You do not need to wrap values in quotes.
  • When specifying an ASN number, leave out the AS prefix. For example, enter 1423 instead of AS1423.

Use a stat filter

To filter based on the type of data associated with one of the Network Analytics stats, use the Filter and Exclude buttons that display when you hover your pointer over the stat. 

In this example, selecting Filter narrows the scope of the view to only traffic associated with the Allow action.

Create a Magic Firewall rule from the applied filters

You can create a Magic Firewall rule that blocks all traffic matching the selected filters in Network Analytics. The currently supported filters are:

  • Destination IP
  • Protocol
  • Source data center
  • Source IP
  • TCP flags

Other types of Network Analytics filters will not be added to the new rule definition. However, you can further configure the rule in Magic Firewall.

Do the following:

  1. Apply one or more filters in Network Analytics.

  2. Select Create Magic Firewall rule.

    Link in Network Analytics to create a Magic Firewall rule

    The Magic Firewall rule editor displays with the selected filters and values.

  3. Review the rule definition in the Magic Firewall rule editor.

  4. Select Add new.

Supported filter fields, operators, and values 

The table below shows the range of fields, operators, and values you can use to filter Network Analytics.

FieldOperatorsValue
ActionEquals
Does not equal
Allow: Traffic allowed through Cloudflare’s automated DDoS protection systems. May also include traffic mitigated by Firewall Rules, flowtrackd and L7 rules.
Block: Traffic blocked by Cloudflare’s automated DDoS protection systems.
Connection-tracking: Applies only exclusively to L7, as Magic Transit is excluded from scope and no conntrack ever runs for Magic Transit prefixes.
Rate-limit: Can be applied per source IP, subnet or any connection. The decision is made programmatically based on heuristics.
Monitor: Attacks which were identified but have chosen to simply observe and not mitigate with any rule.
Attack IDEquals
Does not equal
Attack number
Attack TypeEquals
Does not equal
UDP Flood
SYN Flood
ACK Flood
RST Flood
LDAP Flood
Christmas Flood
FIN Flood
GRE Flood
ICMP Flood
Destination IPEquals
Does not equal
IP address
Destination PortEquals
Does not equal
Greater than
Greater than or equals
Less than
Less than or equals
Port number Port range
Destination IP rangeEquals Does not equalIP range & mask
IP VersionEquals Does not equal4 or 6
ProtocolEquals Does not equalTCP
UDP
ICMP
GRE
Source ASNEquals Does not equalAS Number
Source CountryEquals Does not equalCountry name
Source data centerEquals Does not equalData center location
Source IPEquals Does not equalIP address
Source portEquals Does not equal
Greater than
Greater than or equals
Less than
Less than or equals
Port number
Port range
TCP FlagEquals
Does not equal
Contains
SYN, SYN-ACK, FIN, ACK, RST

Select a dimension to plot

You can plot Network Analytics data along a variety of dimensions. By default, Network Analytics displays data broken down by Action.

Select one of the Summary tabs to view the data along a different dimension.

You can choose from these options: 

  • Action
  • Attack type
  • Destination IP
  • Destination port
  • IP version
  • Protocol
  • Source ASN
  • Source country
  • Source data center
  • Source IP
  • Source port
  • TCP flag

Share Network Analytics filters 

When you add filters and specify a time range in the Network Analytics page, the URL changes to reflect those parameters.

To share your view of the data, copy the URL and send it to other users so that they can work with the same view.

Selecting the URL of the Network Analytics page

View the Activity log

The Network Analytics Activity log shows up to 500 log events in the currently selected time range, paginated with 10 results per page per time range view. (The GraphQL Analytics API does not have this limitation.) 

To display event details, select the expansion widget associated with the events.

Configure columns

To configure which columns display in the Activity log, select Edit columns

This is particularly useful when you would like to identify a DDoS attack, during which you can specify the desired attributes such as IP addresses, max bit rate, and attack ID among others.

View top items

The Source Country, Source, and Destination panels display the top items in each view.

To select the number of items to display, use the drop-down list associated with the view.

To review the top data centers, select Data center from the drop-down list in the Source country view. The Source data center view replaces the Source country view.


Export log data and reports

Export activity log data 

You can export up to 500 raw events from the Activity log at a time. This option is useful when you need to combine and analyze Cloudflare data with data stored in a separate system or database, such as a SIEM system.

To export log data, select Export.

Choose either CSV or JSON format for rendering exported data. The downloaded file name will reflect the selected time range, using this pattern:

network-analytics-attacks-[start_time]-[end_time].json

Export a Network Analytics report 

To print or download a snapshot report from Network Analytics, select Print report. Your web browser’s print interface displays options for printing or saving as a PDF.


Limitations

Network Analytics currently has these limitations:

  • Network Analytics v1 provides insights on denial of service daemon (dosd) attacks. Although it provides a timely view of the data, it does not have a complete view of all events. 

  • The following data sources are not available in Network Analytics v1:

  • Data from Cloudflare services that proxy traffic, such as CDN, is not available in Network Analytics.


Frequently asked questions

How long does Cloudflare retain data in the Network Analytics portal?

If you are using Network Analytics v2 (NAv2), the range of historical data you can query is 90 days.

Network Analytics v1 (NAv1) uses GraphQL nodes to roll up data into 1 minute, 1 hour, and 1 day IP flows. For example, the ipFlows1mGroups node stores data in minute-wise aggregations.

To identify the range of historical data you can query in NAv1, refer to this table. Use the notOlderThan column as an indicator of retention time.

GraphQL data nodes:

  • ipFlows1mGroups
    • maxDuration1: 25 hours
    • notOlderThan2: 30 days
    • Time range selection and Number of data points:
      • 30 minutes - 30 data points
      • 6 hours - 71 data points
      • 12 hours - 48 data points
      • 24 hours - 96 data points
      • 1 week - 168 data points
  • ipFlows1dGroups
    • maxDuration1: 6 months
    • notOlderThan2: 1 year
    • Time range selection and Number of data points:
      • 30 minutes - 30 data points
      • 6 hours - 71 data points
      • 12 hours - 48 data points
      • 24 hours - 96 data points
      • 1 week - 168 data points

When working with attack logs in the dashboard, keep the following in mind:

  • Attack logs are stored with start and end timestamps, packet and bit statistics for minimum, maximum, and average data rate, as well as totals, attack type, and action taken. 
  • Source IP addresses are considered personally identifiable information. Therefore, Cloudflare only stores them for 30 days. After 30 days, source IP addresses are discarded, and the logs are rolled up first into 1-hour groups, then 1-day groups. The 1-hour rollups are stored for 6 month. The one day rollups are stored for 1 year.

For more information on querying and accessing log data, refer to the GraphQL Analytics API

Why does Network Analytics say the destination IP is “unavailable”?

The destination IP is indicated as Unavailable, when the destination IP was not included in the real-time signature generated by our DDoS protection systems

To view the destination IP, filter by Attack ID and scroll to the Destination section in the top items lists. When you filter on a specific Attack ID, the entire Network Analytics dashboard becomes an attack report.

Footnotes

  1. maxDuration defines the time window that can be requested in one query (varies by data node). 2

  2. notOlderThan limits how far back in the record a query can search. It is indicative of how long the data stays in our database. 2