Skip to content
Cloudflare Docs

IBM cloud HSM

The example below was tested using IBM Cloud HSM 7.0 ↗, a FIPS 140-2 Level 3 certified implementation based on the Gemalto SafeNet Luna a750.

Before you start

Make sure that you have:

1. Create, assign, and initialize a new partition

The first step is creating an HSM partition, which can be thought of as an independent logical HSM within your IBM Cloud HSM device.

vm$ ssh admin@hsm


[cloudflare-hsm.softlayer.com] lunash:>partition create -partition KeylessSSL




          Type 'proceed' to create the partition, or
          'quit' to quit now.
          > proceed
'partition create' successful.




Command Result : 0 (Success)

Next, the partition needs to be assigned to the client, in this case your key server.

Terminal window
[cloudflare-hsm.softlayer.com] lunash:>client assignpartition -client cloudflare-vm.softlayer.com -partition KeylessSSL




'client assignPartition' successful.




Command Result : 0 (Success)

After the partition has been assigned, run lunacm from your virtual server and initialize the partition.

vm$ lunacm
LunaCM v7.1.0-379. Copyright (c) 2006-2017 SafeNet.


    Available HSMs:


    Slot Id ->              0
    Label ->
    Serial Number ->        XXXXXXXXXXXXX
    Model ->                LunaSA 7.0.0
    Firmware Version ->     7.0.1
    Configuration ->        Luna User Partition With SO (PW) Signing With Cloning Mode
    Slot Description ->     Net Token Slot




    Current Slot Id: 0


lunacm:>partition init -label KeylessSSL -domain cloudflare


  Enter password for Partition SO: ********


  Re-enter password for Partition SO: ********


  You are about to initialize the partition.
  All contents of the partition will be destroyed.


  Are you sure you wish to continue?


  Type 'proceed' to continue, or 'quit' to quit now ->proceed


Command Result : No Error

2. Generate RSA and ECDSA key pairs and certificate signing requests (CSRs)

Before running the commands below, check with your information security and/or cryptography team to confirm the approved key creation procedures for your organization.

When you perform this operation, you need define the ID field for the newly generated keys. It must be set to a big-endian hexadecimal integer value.

vm$ cmu generatekeypair -keyType=RSA -modulusBits=2048 -publicExponent=65537 -sign=1 -verify=1 -labelpublic=myrsakey -labelprivate=myrsakey -keygenmech=1  -id=a000
Please enter password for token in slot 0 : ********


# cmu generatekeypair -keyType=ECDSA -curvetype=3 -sign=1 -verify=1 -labelpublic=myecdsakey -labelprivate=myecdsakey -id=a001
Please enter password for token in slot 0 : ********


# cmu list
Please enter password for token in slot 0 : ********
handle=61   label=myecdsakey
handle=60   label=myecdsakey
handle=48   label=myrsakey
handle=45   label=myrsakey

Using the keys created in the previous step, generate CSRs that can be sent to a publicly trusted Certificate Authority (CA) for signing.

# cmu requestCertificate -c="US" -o="Example, Inc." -cn="ibm-cloudhsm.example.com" -s="California" -l="San Francisco" -publichandle=45 -privatehandle=48 -outputfile="rsa.csr" -sha256withrsa
Please enter password for token in slot 0 : ********
Using "CKM_SHA256_RSA_PKCS" Mechanism


# cmu requestCertificate -c="US" -o="Example, Inc." -cn="ibm-cloudhsm.example.com" -s="California" -l="San Francisco" -publichandle=60 -privatehandle=61 -outputfile="ecdsa.csr" -sha256withecdsa
Please enter password for token in slot 0 : ********
Using "CKM_ECDSA_SHA256" Mechanism

3. Obtain and upload signed certificates from your Certificate Authority (CA)

Provide the CSRs created in the previous step to your organization's preferred CA, demonstrate control of your domain as requested, and then download the signed SSL certificates. Follow the instructions provided in Upload Keyless SSL Certificates.

4. Modify your gokeyless config file and restart the service

Lastly, we need to modify the configuration file that the key server will read on startup. Change the object=mykey and pin-value=username:password values to match the key label you provided and CU user you created.

Open /etc/keyless/gokeyless.yaml and immediately after:

private_key_stores:
  - dir: /etc/keyless/keys

add:

- uri: pkcs11:token=KeylessSSL;object=myrsakeyid=a000??module-path=/usr/safenet/lunaclient/lib/libCryptoki2_64.so&pin-value=password&max-sessions=1
- uri: pkcs11:token=KeylessSSL;object=myecdsakeyid=a001??module-path=/usr/safenet/lunaclient/lib/libCryptoki2_64.so&pin-value=password&max-sessions=1

With the config file saved, restart gokeyless and verify it started successfully.

Terminal window
sudo systemctl restart gokeyless.service
sudo systemctl status gokeyless.service -l
Cloudflare DashboardDiscordCommunityLearning CenterSupport Portal
Cookie Settings