Skip to content

Configure cloud on-ramps

Beta

Magic Cloud Networking (beta) allows you to create on-ramps from your cloud networks to Magic WAN. Cloudflare will create virtual private network (VPN) tunnels between Magic WAN and your virtual private cloud (VPC), configuring both sides of the connection on your behalf. Cloudflare orchestrates the cloud provider’s native VPN functionality, without requiring deployment of any additional compute virtual machines (VMs).

Prerequisites

Before creating on-ramps from your cloud networks to Magic WAN, make sure you:

  • Have a Magic Cloud Networking account. Contact your account team to learn more.
  • Went through process of setting up your cloud provider.
  • Have the correct cloud resources. Refer to Reference to check resource by cloud provider.

Available on-ramps

Magic Cloud Networking has the following cloud on-ramps integrations:

  • AWS
  • Azure
  • GCP

Refer to Reference to learn more about how Cloudflare orchestrates VPN connectivity to your cloud networks.


Set up on-ramps

Create a Magic WAN cloud on-ramp

  1. Log in to the Cloudflare dashboard, and select your account.

  2. Select Magic WAN > Cloud on-ramps.

  3. Select Add new on-ramp.

  4. Give your new on-ramp a descriptive name.

  5. Select the network you want to connect to, and select Continue.

  6. Configure on-ramp shows where Cloudflare will install the new routes. Installing these routes is required to correctly configure both Magic WAN and your cloud provider, and ensure successful communication between them:

    • Add routes for your Magic WAN address space to your cloud network: Select this option to install routes for reaching Magic WAN in your cloud network’s route tables (refer to Magic WAN Address Space to learn what routes are installed and how to customize them). If you prefer to do this manually, unselect this option.

    • Add routes for your cloud network to Magic WAN: Select this option to create routes for reaching your cloud network in Magic WAN.

  7. Select Continue. Applying your settings might take a few seconds to complete.

  8. Review the changes in your cloud environment, and select Approve changes.

You have successfully created your Magic WAN on-ramp. However, on-ramp creation can take up to an hour before you can use it.

Edit a Magic WAN cloud on-ramp

  1. Log in to the Cloudflare dashboard, and select your account.
  2. Select Magic WAN > Cloud on-ramps.
  3. Select the on-ramp you want to edit.
  4. Select Edit in the side panel.
  5. In Basic information, you can change the name and description of your on-ramp. Select Save when you are finished.
  6. In Configurations, you can modify where the required routes are installed. Select Continue.
    1. Select Save and review after making changes.
    2. Review your settings, and select Approve changes.

Delete a Magic WAN cloud on-ramp

  1. Log in to the Cloudflare dashboard, and select your account.
  2. Select Magic WAN > Cloud on-ramps.
  3. Select the on-ramp you want to delete.
  4. Select Edit in the side panel.
  5. Choose Detach or Destroy to proceed:
    • Detach: Cloudflare will stop managing the cloud resources that were created to build this on-ramp, but will leave them in place. On-ramp connectivity will not be impacted.
    • Destroy: Cloudflare will delete the resources that were created to build this on-ramp in the cloud provider, if possible. Resources cannot be deleted if other resources depend upon them. For example, if an AWS Customer Gateway was created for this on-ramp, but was subsequently used in a second on-ramp, destroying this on-ramp will not destroy the AWS Customer Gateway.

Magic WAN Address Space

By default, Cloudflare installs the following summarized routes in your cloud route tables to direct traffic to Magic WAN:

10.0.0.0/8
172.16.0.0./12
192.168.0.0/16
100.64.0.0./10

To override the defaults with custom prefixes:

  1. Log in to the Log in to the Cloudflare dashboard, and select your account.
  2. Select Magic WAN > Configuration.
  3. Select Magic WAN Address Space.
  4. Delete the prefixes, and enter your custom ones.
  5. When you are finished, select Save changes.

To install a default route to send all traffic to Magic WAN, enter 0.0.0.0/0 (on Azure, enter 0.0.0.0/1 and 128.0.0.0/1).

Cost estimates

You can view estimated costs associated with your cloud resources in the Cloudflare dashboard.

  1. Log in to the Cloudflare dashboard, and select your account.
  2. Select Magic WAN > Cloud on-ramps.
  3. Find the cloud on-ramp for which you want to check the estimated costs.
  4. Select the three dots > Associated Resources.
  5. In the Associated Resources page, you can view the estimated monthly costs for all the resources associated with the on-ramp you chose. You can also search for a specific resource using the search box.