Collect PCAPs

After a packet capture is requested and the capture is collected, the output is contained within one or more files in PCAP file format. Before starting a full type packet capture, you must first follow instructions for configuring a bucket.

Send a packet capture request

Currently, when a packet capture is requested, packets flowing at Cloudflare's global network through the Magic Transit system are captured. The default API field for this is "system": "magic-transit", both for the request and response.

Packet capture limits

Sample and full

time_limit: The minimum value is 1 seconds and maximum value is 300 seconds.
packet_limit: The minimum value is 1 packet and maximum value is 10000 packets.

Full

byte_limit: The minimum value is 1 byte and maximum value is 1000000000 bytes.

Dashboard
API

Log in to your Cloudflare dashboard ↗, and select you account.
Select Magic Transit or Magic WAN.
In Captures, select Start a capture.
Select the Captures tab > Start a capture.
Choose the type of capture you want to perform, and select Next.
Fill out the required fields to begin the capture and then select Start.

The main Packet captures page displays a list of captures.

The PCAPs API needs both system and type to be specified to start a capture. A PCAP's system is the product or logical subsystem where packets are captured, and a PCAP's type is how the captured packets are built into a PCAP file.

Currently, you can only send one collect request per minute for sample PCAPs, and you can only have one running or pending full PCAP at a time.

Full PCAP

For full PCAP requests, refer to the required parameters listed at Create full PCAP requests. Note that full packet captures require two more parameters than sample packets.

The full PCAP request endpoint also contains optional fields you can use to limit the amount of packets captured. Both full and sample packet requests contain an optional filter_v1 parameter you can use to filter packets by IPv4 Source address, for example. For a full list of the filter options, refer to the parameter lists above.

Leave filter_v1 empty to collect all packets without any filtering.

curl https://api.cloudflare.com/client/v4/accounts/{account_id}/pcaps \
--header "X-Auth-Email: <EMAIL>" \
--header "X-Auth-Key: <API_KEY>" \
--header "Content-Type: application/json" \
--data '{
  "filter_v1": {},
  "time_limit": 300,
  "packet_limit": 10000,
  "byte_limit": 100000000,
  "type": "full",
  "colo": "ORD",
  "system": "magic-transit",
  "destination_conf": "${BUCKET}"
}'

While the collection is in progress, the response returns the status field as pending. You must wait for the PCAP collection to complete before downloading the file. When the PCAP is ready to download, the status changes to success.

{
  "result": {
    "id": "7d7c88382f0b4d5daa9587aa45a1a877",
    "submitted": "2022-06-02T18:38:22.269047Z",
    "filter_v1": {},
    "time_limit": 300,
    "status": "pending",
    "type": "full",
    "system": "magic-transit",
    "packet_limit": 10000,
    "byte_limit": 100000000,
    "colo": "ORD",
    "destination_conf": "gs://test-magic-pcaps"
  },
  "success": true,
  "errors": [],
  "messages": []
}

Sample PCAP

To create a sample PCAP request, send a JSON body with the required parameter listed at Create sample PCAP request.

Leave filter_v1 to collect all packets without any filtering.

curl https://api.cloudflare.com/client/v4/accounts/{account_id}/pcaps \
--header "X-Auth-Email: <EMAIL>" \
--header "X-Auth-Key: <API_KEY>" \
--header "Content-Type: application/json" \
--data '{
  "filter_v1": {
    "source_address": "1.2.3.4",
    "source_port": 123,
    "destination_address": "5.6.7.8",
    "destination_port": 80,
    "protocol": 6
  },
  "time_limit": 300,
  "packet_limit": 10000,
  "type": "simple",
  "system": "magic-transit"
}'

The response is a JSON body that contains the details of the job running to build the packet capture. The response contains a unique identifier for the packet capture request along with the details sent in the request.

{
  "result": {
    "id": "6d1f0aac13cd40e3900d29f5dd0e8a2b",
    "submitted": "2021-12-20T17:29:20.641845Z",
    "filter_v1": {
      "source_address": "1.2.3.4",
      "source_port": 123,
      "destination_address": "5.6.7.8",
      "destination_port": 80,
      "protocol": 6
    },
    "time_limit": 60,
    "status": "pending",
    "packets_remaining": 0,
    "type": "simple",
    "system": "magic-transit"
  },
  "success": true,
  "errors": [],
  "messages": []
}

Log in to your Cloudflare dashboard ↗, and select you account.
Select Magic Transit or Magic WAN.
In Packet captures, select Start a capture.
Select the Captures tab.

To check the status of a running job, send a request to the endpoint and specify the PCAP identifier. The PCAP identifier is received in the response of a collect request as shown in the previous step.

curl https://api.cloudflare.com/client/v4/accounts/{account_id}/pcaps/{pcap_id} \
--header 'X-Auth-Email: <EMAIL>' \
--header 'X-Auth-Key: <API_KEY>'

The response will be similar to the one received when requesting a PCAP collection.

{
  "result": {
    "id": "6d1f0aac13cd40e3900d29f5dd0e8a2b",
    "submitted": "2021-12-20T17:29:20.641845Z",
    "filter_v1": {
      "source_address": "1.2.3.4",
      "source_port": 123,
      "destination_address": "5.6.7.8",
      "destination_port": 80,
      "protocol": 6
    },
    "time_limit": 120,
    "status": "success",
    "packets_remaining": 0,
    "type": "simple",
    "system": "magic-transit"
  },
  "success": true,
  "errors": [],
  "messages": []
}

The capture status displays one of the following options:

Complete: The capture request is done and ready for download.
In progress: The capture request was captured but still processing.
Failure: The capture failed. If this occurs, verify your ownership information.

Download packet captures

After your request finishes processing, you can download your packet captures.

Dashboard
API

Log in to your Cloudflare dashboard ↗, and select you account.
Select Magic Transit or Magic WAN.
In Packet captures, select Start a capture.
Select the Captures tab.
Locate your packet capture you want to download, and select Download.

Packet captures are available to download when the Status displays Success.

For more information on how to process multiple saved capture files into a single output file, refer to Wireshark's mergecap documentation ↗.

Full PCAPs

To obtain full PCAPs, download the files from the bucket specified in destination_conf after the PCAP's status is success. You may find multiple files named pcap_<pcap_id>.pcap per capture as captures can occur across multiple machines.

Sample PCAPs

Once the sample PCAP collection is complete, you can download the PCAP by specifying the PCAP identifier used earlier.

curl https://api.cloudflare.com/client/v4/accounts/{account_id}/pcaps/{pcap_id}/download \
--header 'X-Auth-Email: <EMAIL>' \
--header 'X-Auth-Key: <API_KEY>' \
--output download.pcap

List packet captures

Dashboard
API

Log in to your Cloudflare dashboard ↗, and select you account.
Select Magic Transit or Magic WAN.
In Packet captures, select Start a capture.
Select the Captures tab.

The list of packet captures associated with your account displays.

To view a list of sent requests, use the following command:

curl https://api.cloudflare.com/client/v4/accounts/{account_id}/pcaps \
--header "X-Auth-Email: <EMAIL>" \
--header "X-Auth-Key: <API_KEY>"

The response returns an array that includes up to 50 sent requests, which includes completed and ongoing requests.

{
  "result": [
    {
      "id": "43adab5adeca4dab9c51f4b7f70f2ec3",
      "submitted": "2021-12-15T03:04:09.277394Z",
      "filter_v1": {},
      "time_limit": 120,
      "status": "success",
      "packets_remaining": 0,
      "type": "simple",
      "system": "magic-transit"
    }
  ],
  "success": true,
  "errors": [],
  "messages": []
}

Was this helpful?

Cloudflare Dashboard Discord Community Learning Center Support Portal

Cookie Settings